ESP32 · WiFi Penetration Testing
Flash Striker
in seconds
Connect your ESP32 via USB, click Install, and your device is ready. No drivers, no terminal, no setup.
One-Click Flash
Chrome or Edge browser (required for Web Serial)
ESP32 connected via USB data cable
No drivers or software installation needed
Manual Flash Offsets
| File | Offset |
|---|---|
| bootloader.bin | 0x1000 |
| partition-table.bin | 0x8000 |
| striker.bin | 0x10000 |
esptool.py --chip esp32 --baud 460800 write_flash \
0x1000 bootloader.bin \
0x8000 partition-table.bin \
0x10000 striker.bin
Management AP
NetStrike32
Password
Strike32!
Web Interface
192.168.4.1
Target
ESP32